Set the drain to its open position. Unscrew the knob on the top of the drain stopper to see if there is a set-screw underneath. If your drain stopper has a set-screw, use a small screwdriver or a hex key to unscrew it. Twist the entire stopper counterclockwise until it pulls free from its mounting post.
How do you remove tub drain with pliers?
The pliers need to be small enough to reach into the drain and through the cross. Once the locking pliers are secured, you use a pair of standard pliers to turn the locking pliers and loosen the drain. If your drain doesn’t have crossbars, you’ll need to use a tool called a tub drain extractor.
How do you remove an old bathtub faucet stem?
Wiggle the handle and pull it off. You may need a faucet handle puller if the handle will not come off by hand. Place a socket wrench over the bathtub faucet stem until it covers the hex nut. Turn the wrench counterclockwise to loosen the nut until you can pull the stem free.
How do you remove a stuck pop up tub drain?
If the bathtub pop-up drain stopper is stuck and simply won’t unscrew, use a pair of pliers around the round cap to wiggle it loose. Placing a soft, thin cloth between the pliers and the top of the stopper can help prevent damage. Wiggle the stopper left and right and up and down to free it.
What is the best tool to unclog a tub drain?
Tools You’ll Need to Unclog a Drain The first tool to reach for when trouble arises is a plunger. This plumber’s friend clears clogs from most fixtures, including sinks, tubs and toilets. Every homeowner should keep one handy.
How to unclog a bath tub drain?
Remove the bathtub drain stopper and see if there is any visible blockage (clumps of hair).
Why is my bathtub not draining?
The most likely reason that your bathtub is not draining is because there is an obstruction in the drain. You will have to remove the obstruction and possibly treat the drain with a drain cleaner to break through any debris that is too far down the bathtub drain for you to reach.
How do you replace a bathtub drain?
Slide the new rubber gasket on top of the drainpipe under the tub and insert the new drain flange with plumber’s putty on it as shown in Photo 3. Use the supplied bushing if the new threads are different from the old. Screw the stopper into the stopper body and congratulate yourself on a job well done.
How to replace a broken bathtub drain?
Remove the Drain Components. Take out the screws on the cover plate and pull it away from the tub wall.
