The error code E90 is just a group error code. It is indicating a communication error between the two boards in your machine. It does not indicate where the problem may be. A power glitch may have caused the E90 error code or a loose connection. One of the control boards could have failed.
How do I reset my Zanussi washing machine?
Resetting guide: Press the two buttons at the top (soak and pre-wash). At the same time, turn the cycle selector counter-clockwise to the delicate spin cycle. Then release the two buttons and continue turning the selector counter-clockwise all the way round to off (almost one full turn). Try to wash normally.
What does E90 mean on a Zanussi washing machine?
Clean the filter (located bottom right of machine). It is prudent to place a large pan under the opening to catch any spillage. If it does not solve the problem then an E90 error message indicates a problem between the control panel and the main circuit board or that the circuit board got wet.
What does error code E91 mean?
configuration / communication problems
Issue: Washer dryer displays error message E90, E91, E92, E93 or E94. It indicates configuration / communication problems with the electronic parts.
How do you reset a Zanussi Aquacycle 1200?
press and hold the start button and the reset button. Keep them both held in and turn the washer on. Keep the botton held in for several seconds till the leds flash then let go.
What does code e20 mean on a Zanussi washing machine?
Check for a blocked drain. Check whether the drains are draining satisfactorily. Try a wash with the drain hose in a bowl or sink. if the washing machine is working correctly after the test wash, it may indicate that the siphon/outlet is clogged – make sure the siphon/outlet is clear.
How do I fix error E91?
Resolution
- Reset the appliance. Remove the plug from the socket, wait 30 seconds and then plug it in again.
- Contact an Authorized Service Center. If the above suggestion did not solve the problem, we recommend requesting a visit by a service engineer.
What does E90 mean on Bosch dryer?
Dryer Error E90 Errorcode E90 occurs because of a Fault with the electronics This can only be eliminated by an experienced engineer.
What E20 means?
drain problem
The E20 error code is a class code that indicates a drain problem in the washer. This is consistent with the drain and spin problem that you are observing.
